Connect to a GPS NMEA device or to the LocationProvider in Android or Windows 10.

Parameters

Serial Port <unquoted string>
	The name of the port that user wants to connect to GPS. Tipically is a Com Port, and user could choose from pre-defined Com Ports from Com1 to Com13. It's also possible defined a port dynamically by choosing option dynamic for this parameter. This parameter is ignored by Android and Windows 10 clients. In these clients the GPS API from the device will be used for internal GPS.
Baud Rate <numeric>
	The baud rate for the serial port that user wants to connect the GPS. There are several pre-defined values for this parameter. For more information, see the notes.
Data Bits <unquoted string>
	The number of data bits transmitted throw the GPS connection. The possible values for this parameter are: 7 bits, 8 bits or dynamic.
Stop Bits <unquoted string>
	The number of stop bits in the GPS connection. The possible values for this parameter are: 1 bit, 2 bits or dynamic.
Parity <unquoted string>
	The parity of bits in the GPS connection. The possible values for this parameter are: None, Even, Odd or dynamic.
Device String <string>
	The name of the device where the GPS is connected. If the user wants to specify a different device string for the connection, he must define a string is this parameter.
Accuracy <numeric>
	High - To receive coordinates only from the GPS that has high accuracy. Low - To receive coordinates only from the network connection that has low accuracy. Any - To receive coordinates from any source, GPS or network connection.