| Address - Memory Bank <unquoted string> |
|
Defines the memory bank to this read action. The possible values are: EPC, User, Reserved, TID or dynamic. |
|
|
| Address - Start Address <numeric> |
|
The address where the write action begins. Normally it must be a multiple of 2. |
|
|
| Address - Data <numeric> |
|
The data to write in ASCII bytes. |
|
|
| |
|
| Details - Coded <unquoted string>> |
|
Indicates if the readed data is coded or not. The possible
values are: Yes, No or dynamic. Use Yes if the established connection
is in String Data Mode.
|
|
|
| Details - Access Password <string> |
|
The password defined if the user uses Class1 Generation2 tags.
|
|
|
| Filter - Apply Filter <string> |
|
Specifies if a filter is to be applyed.
|
| |
|
Filter - Memory Bank <string>
|
| |
Selectes the memory bank for the filter.
Specifying "-1 - EPC ID Content" indicates that
the filter should be done on the EPCID inside the EPC memory bank. It is
equivalent to making the filter on the EPC memory bank with "Bit
Position" parameter = 32. |
| |
|
Filter - Mask Value <string>
|
| |
Hexadecimal mask value to be used for the filter. |
| |
|
Filter - Bit Position <string>
|
| |
Starting bit position for the filter. |
| |
|
Filter - Bit Lenght <string>
|
| |
Number of bits to use from the "Mask Value". |
